Fire Pumps
Split Case Fire Pumps
- Capacities to 5000 gpm (18,925 I/min)
- Pressures to 640 psi (44.1 bar)
- Suction and discharge flanges are on a common centerline
- Electric motor or diesel engine drivers
- Dynamically balanced impeller (s)
- Anti-rotation pins a casing split
- Casing rings sealed to casing housing by o-rings
- Double-row outboard ball thrust bearings
- No snap rings used in pump construction
- Minimum bearing span
- Sleeves held in compression by outside sleeve nuts
Inline Fire Pumps
- Capacities to 1500 gpm (5,678 I/min)
- Pressures to 167 psi (11.5 bar)
- Suction and discharge flanges are on a common centerline
- Suction and discharge flanges are of equal size
- Compact space saving design
- Dynamically balanced impeller
- Bearing free design
- Self venting (No air release required)
- One stuffing box cuts leakage
- No foundation or pads required
- Top pullout design
- No straight pipe required on suction side to meet NFP #20 requirements
Vertical Turbine Fire Pumps
- Capacities to 5000 gpm (18,925 I/min)
- Pressures 500 psi (34.4 bar)
- Required by NFPA #20 when operating under a static suction lift condition
- Electric motor or diesel engine drivers
- Dynamically balanced impellers
- Stainless steel line shaft and coupling (s)
- Open lineshaft design provides for product lubrication of the bearings
- Available in special materials of construction for salt water applications
- Provided with a bronze suction straine
Valves
Control Valves
- UL listed and FM approved control valves
- Pressure relief, reducing and sustaining valves
- Deluge valves (electric and pneumatic)
- Suction control valves
- Altitude tank fill valves
- Air release valves
- Hydrant valves
- UL listed fire pump casing relief valves
Fire Valves - Fire Fighting and Hose Equipment
- UL listed and FM approved OS&Y gate valves, grooved and water butterfly valves with tamper switches, grooved and flanged check valves, post indicator valves and flexible sprinkler connections
- Fire hoses, valves, hose cabinets and access panels
- Fire extinguishers
- Pressure reducing and floor control valves
- And lots more!!
Fire Pump Control Panels
Control Panels
- UL listed and FM approved
- Reduced voltage starting available (Part winding, primary resistance, wye delta open, wye delta closed, soft start/soft stop and autotransformer types)
- Variable frequency drive (VFD) control panels available
- Automatic power transfer switches available
- UL 508 approved jockey pump control panels
- Remote alarm and low suction control panels
Ken-Jo-Matic Pressure Pumps
Ken-Jo-Matic Pressure Pumps
- UL 508 listed components
- Capacities to 1.6 gpm (6 I/min)
- Pressures to 170 psi (11.7 bar)
- Built in pressure relief valve
- 1/2" brass union installed at the sensing line inlet connection for easy pressure switch maintenance
- 8" high pressure flexible inlet/outlet connections with 1/2" swivels
- Prewired control unit that is suitable for wall mounting
- Great for use as a jockey pressure maintenance pump or in parallel with alarm check valves in avoid nuisance alarms
Fiberglass Water Storage
Containment Solutions
- UL 1316 listed - Glass fiber reinforced plastic
- Meets or exceeds the requirements of ANSI/AWWA-D120
- NFPA #20 and NFPA #22 compliant
- Tanks will withstand surface HS-20 axle loads (32,000 lbs. / axle)
- Atmospheric pressure only; supplied with proper venting
- Supplied with 22" manway and cap (30" or 36" sizes optional)
- Supplied with gusseted tangential flanged bottom nozzle
- Flexible piping connectors available
- Automatic water level control systems
Suppliers
